Car Phone Mount, Phone Holder for Car, Easy Installation with One-Touch Design Dashboard Windshield Car Phone Holder Compatible iPhone 12/11/11 Pro/Xs Max/XS/XR/X/8/7, Galaxy, Moto and More
Works with most smartphones and cases. The arms present a firm grip to hold the latest iPhone series, Galaxy series, phones from Motorola, Sony, and any other mobile phone brands with width in a range of 1.8in/4.5cm and 3.7in/9.3cm.
Sticky Suction Cup
The suction cup has a coating of sticky gel that prevents air gaps and ensures a secure hold on the dashboard, windshield, or desktop. Note: Works on smooth and flat surfaces. Do not attach it to the windshield in hot summer.
Warm Prompt
The total thickness of the combination of phone and phone case should not exceed 13mm/0.5in. To ensure a firm grip, please remove the ultra-thick phone case, pop grip, and phone ring holder when using this car phone holder.
You can easily adjust the length of the arm by turning the knob, and customize the distance between your phone and you as needed. The knob has been upgraded and uses an anti-fall design, it will not fall off during the adjustment process.
Anti-skid and Anti-scratch
There are sponge pads on the arms, bottom feet and surface, which can protect your device from being scratched. Also. The cushioned car mount absorbs the vibration during bumps, and holds the phone securely in place.
Rinse and Reuse
If the sticky suction cup gets dirty or loses its stickiness, simply rinse it with water and let it air dry, it will stick like new. You can easily remove the car phone mount holder from vehicle to vehicle and re-attach it as you want.
Multiple Mounting Options You can mount it on either the dashboard or windshield to suit your various needs. When mounted on the curved or textured dashboard, you can attach the extra pad to the dash and then attach the mount to it for providing a smooth mounting surface; When mounted to the windshield, you do not need the pad. Kindly Note 1. It is recommended to install the dashboard/windshield car phone mount on a smooth, flat and clean surface. 2. Peel the protective film from the suction cup and dashboard pad before use. 3. After attaching the suction cup to the mounting surface, please pull down the lever to push all air out. 4. For stronger viscosity, allow the dashboard pad to sit for 24 hours after installation. 5. The additional dashboard pad uses 3M adhesive, so it is non-washable and non-reusable. 6. Do not expose it to direct sunlight for a long time.
【Extendable longer arm】 Telescopic arm of this car phone mount can extend from 11. 8cm (4. 6in) to 16. 8cm (6. 6in) (much wider range than other car phone mount for closer Device viewing) and pivot up or down for optimal viewing height. Prevent from blocking your view while driving.
【Washable Strong Sticky Suction Pad】Firm suction pad sticks tightly on the dashboard or most surfaces. Flip once for smooth surface. Flip twice for uneven or curved surface. Remove easily by pulling the suction pad.
【Wide Compatibility】Stretchable arm extends from 1.6- 3.9in (66-100mm), suitable for cellphones or GPS navigations between 4-6 inches, like Galaxy S10/S9/S8/S7/S6, iPhone 12/ 11 Pro/ 11 Pro Max/ X/XS/XR/8Plus/8/7Plus/7/6Plus, Google Pixel, Nexus 6 6P 5X 5, LG G6 5 4 3, OnePlus 3 2 x, etc. (This car mount may not very suitable for wide phones with cover case)
【Install in Seconds】 You can release or lock your mobile device with single hand. The lever on the suction cup provides strong gripping on the dashboard or windshield, keeping it fixed throughout your drive. The car mount features three different ways to move and adjust, including adjustable arm length, rotatable arm, and a 360° joint Ball to help you find the most suitable angle for safe driving.
【Full 360° rotations, One-touch system】 This car phone holder install swivel ball head ensures 360° free Rotations to your desired viewing angle. Quick to adjust for a safe and effortless drive. Easy one-touch mounting system locks and releases the device with just a push of a finger.