Godox X2T-C TTL Wireless Flash Trigger for Canon, 1/8000s HSS Bluetooth Connection Supports iOS/Android App Controller, TCM Function, 5 Separate Group Buttons, New Hotshoe Locking, New AF Assist Light
This wireless flash trigger transmitter model X2T-C can be used for studio flash, speedlite and camera shutter. It Compatible with Canon hot-shoe mounted DSLR or Mirrorless series cameras. With this X2T-C wireless flash trigger, high speed synchronization is available for most camera flashes which support TTL. The max synchronization speed can reach to 1/8000s.
Compatible Camera Models (This table only lists the tested camera models, not all Canon EOS series cameras. For the compatibility of other camera models, a self-test is recommended.)
1Dx Mark II, 1Dx, 5Ds/5Dsr 5DⅣ, 5D Mark III, 5D Mark II, 5D, 7D Mark II, 7D, 6D, 80D, 70D, 60D, 50D, 6D MarkII, 77D, 800D , 40D, 30D, 750D/760D, 700D, 650D, 600D, 550D, 500D, 450D, 400D Digital 350D, DIGITAL 100D, 1200D, 1000D, 1100D, M5, M3, EOS R, M50, 1500D(2000D/T7), 3000D(4000D)
Please Note1: The cameras which are released before 2012 do not have TTL mode in their D and E group.
Please Note2: 1500D(2000D/T7), 3000D(4000D): When the high-speed shutter is higher than 1000, there will be lunimance edge on the photo.
New Features:
Quick Access 5 Group Buttons for Fast Group Management
Built-in Bluetooth Connection for Smartphone APP Control
New AF Assist Light for easier autofocus in the dark
Pro 1/10th of a Stop Manual Precision
Relocated Bottom Dial Wheel for Convenient Operation When Install a on Top Flash
Slide Quick Lock Hot-Shoe for quick set up
New Channel Scan Function for Purest Signal Strength
Specification:
Compatible cameras: Canon EOS cameras(E-TTL II autoflash)
Manual Mode: Yes
Multiflash Mode:Yes
High-Speed Sync: Yes
Rear-Curtain Sync:Yes
Flash Exposure Compensation: Yes, ±3 stops in 1/3 stop increments
Flash Exposure Lock: Yes
Focus Assist: Yes
Modeling Lamp: Yes
Beeper: Yes
Transmission Range(Approx.): 0-100m
Modulation Mode: MSK
Channels: 32
Wireless ID: 01-99
Groups: 5
Display: A large LCD panel, backlight ON or OFF
Controlled by Cell Phone
You can control the trigger by downloading "GodoxPhoto" APP. After downloading the APP, you can connect the trigger and cell phone by bluetooth.
Support TTL Function
Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, Scan setting, One-shot and Multi-shot setting, control of the modeling lamp, adjusting all groups' output value simultaneously, ect.
New AF Assist Light
The X2T-C has a new AF assist light that uses visible light instead of a red/infrared pattern. So, a certain brand of camera should find it a little easier to use autofocus in the dark now.
Godox X2T-C has the new hotshoe locking mechanism as like as the Godox V1, which automatically locks, and a button to quickly unlock and twist it open to remove it.
Relocated Bottom Control-Wheel
The dial is positioned in the bottom of the left-hand corner so as not to obstruct the LCD panel of the camera, which should allow easier spinning.
Type-C Connection
The MicroUSB has been upgraded to a Type-C. Type-C sockets are just much more solid than microUSB, as are the cables. They’re less prone to being damaged or bent. And you can now upgrade the firmware ether in Windows or Mac system
With 5 group, 32 channels and access to 99 wireless ID settings to limit the interference from other nearby systems. Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same
1/256 Minimum Power Output
The minimum power output can be precisely set to 1/256 in 1/10 step adjustment.
????[Application] Godox X2T-C transmitter can remote control the Godox Flashes V1/SK300/SK400II TT350 TT600 TT685 V860II V860III AD100Pro MF12 AD200/AD200pro AD400pro AD600BM AD600B AD600pro, which has a built-in 2.4G wireless X system. Compatible for Canon EOS Camera Model: 70D, 80D 760D, 750D, 500D, 600D, 400D, 6D, 50D, 60D, 1DX, 580EX II, 5D Mark II III, etc.
????[Built-in Bluetooth for APP Control]: You Can Connect the X2T-C to Your Phone or Tablet via Bluetooth after Download the "GodoxPhoto" APP, Then control the Flash Mode, Power Output, the Modeling Light Mode, the Beep of Godox Flashes, and etc. It is Extremely Useful When Doing Product Photography in the Studio While the Radio Trigger is Hard to Reach on the Top of the Camera.
????[TTL Autoflash and Pro Functions]: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, Scan setting, One-shot and Multi-shot setting, Control of the Modeling Lamp, Adjusting All Groups' Output Value Simultaneously, etc.
????[Large LCD Display, Easy to Operate]: LCD with Clear Display Effect, With 5 Group Setting Buttons, and 3 Function Buttons to Realize Quick Setting. Relocated Control-Wheel. New Hotshoe Locking Mechanism. New AF Assist Light that Uses Visible Light Instead of A Red/Infrared Pattern. USB-C Connection that is More up to Date and More Reliable than A MicroUSB.
????[3.5mm Sync & USB Type-C Port]: It can work as a Wireless Godox Flash Trigger/ Wireless Shutter Release Trigger/ Wireless Canon Speedlights Trigger/ Flash Trigger with 3.5mm Sync Cord Jack.