ICY BOX USB 3.0 Universal Laptop Docking Station for Windows/Mac - Dual Monitor Dock (Dual HDMI, Gigabit Ethernet, Audio, 4 USB Ports) with USB B to A/C Cable

Technical data

Data transfer rate: USB 3.0 up to 5 Gbit/s | USB 2.0 up to 480 Mbit/s | LAN up to 10/100/1000 Mbit/s

USB charging port: Up to 5 V, 2.1 A

Resolution: Watch videos on clear and sharp 2K 60Hz screens (1920x1200 @ 60Hz).

Power supply: Wall power supply100-240 V AC, 5 V/4 A DC

Compatibility: Windows, macOS

Not Compatible: Linux / Unix; or ARM-based Windows operating systems (such as Surface RT).

Frequently Asked Questions

This DockingStation is based on the DisplayLink technology - What is DisplayLink?

• With DisplayLink, you can quickly and easily connect several monitors to your PC via a simple USB connection. The DisplayLink driver software for DockingStation communication is installed on your computer.

Compatibility with host computers?

• All your USB devices from USB 3.0 are completely supported. With an adapter, the DockingStation can additionally connected to a USB 3.0 Type-C port. Make sure that the latest USB drivers and DisplayLink drivers are installed.

How many monitors can I connect?

• Up to 6 monitors are possible under Windows with DisplayLink technology. Under macOS 4 monitors are possible.

Is the DockingStation ready for gaming?

• No, first and foremost this technology is designed for productive use.

Is Windows 10 supported?

• Yes, please install the newest Windows DisplayLink Driver to you Windows device.

Can I use the DockingStation with Mac?

• Yes, please install the newest macOS DisplayLink Driver to you Apple device.
• ATTENTION: Apple devices with the operating system macOS 10.13.4 are not supported! As of macOS 10.13.5 and higher, the operation of the DockingStation is again possible without limitations!

Is the notebook charged through the DockingStation?

• No, this is not possible with DisplayLink technology. The notebook must be powered separately.

How easy is the setup?

• Simply install the DisplayLink driver software and connect the DockingStation to your notebook or PC. The DisplayLink driver automatically configures the monitor for optimal display quality and saves these settings for future use.

The included USB cable is too short, can I use a third-party cable?

• Yes, this is basically possible. But is not recommended.

Does the DockingStation prevent the use of video connections on the notebook directly?

• No, using the DockingStation does not limit the functionality of your notebook in any way.

Does the DockingStation support audio output via HDMI or DisplayPort?

• Yes, this is supported if your monitor has built-in speakers. To do this, you will need to change the default audio output in your system accordingly.

No network connection via the DockingStation, but via the host computer. What is the problem?

• It is possible that the LAN/WLAN is only released for a known MAC address. In this case, the MAC address of the DockingStation and notebooks must be equated, or the passthrough of the MAC address of the notebook must be enabled. You can usually make this setting in the BIOS of your notebook.

The monitor does not turn on again after the notebook wakes from sleep mode. What to do ?

• On your monitor, change the input signal setting from AUTO to the specific source you are using (e.g., HDMI or DisplayPort). If the automatic search for an active connection does not find a video signal after a long time, the monitor goes into sleep mode and may stop responding to any signal from the DockingStation. Windows may have automatically turned off the USB root hub to save power. To prevent this from happening, follow these simple steps to change the USB root hub settings in order to stay active during sleep mode.