LUTE Window Film Rainbow, Window Clings Holographic, 3D Decorative Window Vinyl, Static Cling Window Sticker Non-Adhesive, UV Blocking Window Decals for Door and Kitchen 23.6 x 78.7 inches
Product Description
LUTE 3D Rainbow Window Films Decorates your glass and door window with Rainbow
A day's sunny mood is from the nice window clings
Key Features of LUTE 3D Window Film with Rainbow Reflection:
- Semi-Privacy Protection: Original it is frosted window film which adds a little privacy to your room or office without compromising natural light and prevents direct peeping from outside.
- Colorful Rainbow Reflection: The 3D rainbow window cling varies when the sunlight and light hit the window film directly and creates a rainbow visual effect.
- UV protection: Blocks out 99% of harmful UV rays, protecting people and furniture from being exposed directly to the strong sunlight.
- Removal and Reusable: Made of premium PVC material, this window sticker can be removed and reused multiple times.
- Easy Cut and Installation: No glue needed stained glass window film, cut and paste it against the glass window with enough water.
Easy Installation ( Please follow the steps carefully):
- Measurement: measure the window glass size and trim the window film with an extra inch margin on each side.
- Clean of the glass window: clean the target glass thoroughly and make sure the surface is clean without any dust.
- Peel off the backing film from the window film.
- Paste of the window film: spray enough water on the window surface and the window film, and then stick the window film to the glass.
- Use a squeegee or card to remove all the air and bubbles patiently.
- Trim off the margins in the window frame, well done.
(Kindly remind that it is reusable if the first trial is not that successfully, please retry patiently, just do believe it is easy for you)
Tips:
- Make sure the glass window is clean and smooth without any dust and fiber.
- The back film must be peeled off when applying to the window.
- Cut off the excess edges in the window frame part is needed.
- Enough water sprayed in glass and window film make the stick effection better.
- Soften it in warm water during cold time is helpful before application.
|
|
|
|
|
|---|---|---|---|
Measure and CutMeasure the window glass size and trim the window film with an extra inch margin on each side |
Clean and SeparateClean the glass window thoroughly and make sure the surface is clean without any dust. Peel off the backing film from the window film. |
Wet and ApplySpray enough water on the window surface and the window film, and then stick the window film to the glass. |
Flatten and TrimUse a squeegee or card to remove all the air and bubbles patiently. Trim off the margins in the window frame, well done. |
