Viewing a single comment thread. View all comments

spluga t1_iy1vaou wrote

Thank you for taking the time to test that for me! So the USB-A port appears to limit to 5w regardless of low-charge mode (did you mean the fourth bullet to be USB-A, low charge off?).

2

fazalmajid t1_iy1vlgj wrote

Yes, corrected my post. Not sure why it isn't doing the 10W standard USB-A is capable of, even if it can't do the non-standard Apple 12W charging mode at 2.4A. I'll try again with a different power meter and cables.

1

spluga t1_iy2bh1h wrote

Yes, 5W and not 10W is surprising. Looking forward to what you find, if you can!

1

fazalmajid t1_iy38x04 wrote

OK, I switched to an Apple-branded USB-A to Lightning cable and Klein ET920 tester, verified with an Apple 10W USB charger that it did 5.07V 1.68A on an old iPad Pro with Lightning connector (it was 87% full so probably not drawing at its fullest).

When put on the Nitecore on, it did the same 5.07V 1.56–1.68A whether I turned on slow-charge mode or not. At this point I think it's a placebo, and if you want fast charging up to the rated 18W you must use USB-C, but on USB-A YMMV depending on the cable.

This also confirms my feeling that every power bank maker should adopt the Anker 737's status display feature, and that a USB multimeter is a must-have accessory.

3

spluga t1_iy3jk8g wrote

Thanks for the follow up! Agree, agree.

2