Viewing a single comment thread. View all comments

destinationbedamned t1_j14kj4m wrote

Reply to comment by HairyBull in Looking for bicycle recommendations by Sargaxon

I agree, it's pretty hard to find a really great bike for under $1000 so find a used bike that's in good shape to save money. The bikes that I see people ride for decades typically have the fewest amount of moving parts, so they tend to be fully rigid frames. That being said, of you wanted things like suspension, as long as the frame is good you can swap out parts as they wear down and keep a bike running for many years. I recently did a full overhaul on a used mountain bike where I swapped out most of the drivetrain, got new suspension forks, and had all the bearings serviced and I was able to do it for under $1000, and should keep that bike on the trails for many more years to come. As long as you avoid buying high performance parts you should be able to do everything on a budget.

3

hidz526 t1_j1717f2 wrote

Really great points. Upgrading components later is a great strategy. My husband is a cycler, & worked in a shop for a while. The only thing I would add, is you should get fitted (or sized for lack of a better term) for a bike. Even if you buy used, you can look for something n the size range. This is much more important than I first realized. Go to a professional cycle shop if at all possible & ask about this.

Getting a frame sized for your body & learning where the seat should be, (moved forward or back as well) will mean the difference between a comfortable, enjoyable ride & discomfort in shoulders, arms, low back, &even your hands.

3

Gamer_Bread_Baker t1_j1fl9t3 wrote

I agree with the simplicity. If you decide to get a fixed gear, about $1000 can get you an amazing steel bike that’s pretty light. I’d go for Wabi if you do want one.

1