Submitted by work_blocked_destiny t3_1232ui8 in DIY
darkwing79 t1_jdszqb0 wrote
If that is the neutral floor the light it will need to be connected to the same neutral that is connected to N and the switch
work_blocked_destiny OP t1_jdszzah wrote
Damn! So 4 14ga wires all need to be twisted together!? Probably have to get a splicer.
darkwing79 t1_jdt09ws wrote
Yes, wire back to the panel, wire to the switch, wire to the smart switch and wire to the load. Put all 4 together twist them with together with a pair of pliers and stick a wire nut on them.
work_blocked_destiny OP t1_jdt1zga wrote
That did it! Thanks a bunch!
darkwing79 t1_jdt28ax wrote
No problem, just remember to be careful and always double check the wiring. Be safe.
Viewing a single comment thread. View all comments