Submitted by Acrobatic-Studio-298 t3_127gz45 in DIY
johnr588 t1_jeev47b wrote
Use two layers, first is base rock tamped down tight and properly sloped then a couple of inches of masonry or paver sand. Finally paver sand is used to fill the cracks after the bricks are laid. Do not use pea gravel. The roundness of pea gravel does not allow it to tamp down tight.
You also need a border to keep everything tight.
Acrobatic-Studio-298 OP t1_jeg4lwg wrote
Very helpful thanks
Viewing a single comment thread. View all comments