Submitted by of_little_faith t3_124xokl in DIY

Doing repairs after water damage. Youtube tells me this is likely "stomp brush" technique, but no one shows a pattern that looks exactly like this, specifically the radial lines outside the central application and the depth of the texture. Is there a specific brush that would do this, or is it just the technique of a typical stipple/stomp/crowsfoot brush? Or did this application just use a lot more compound than I'm seeing on youtube demonstrations? Any experience is much appreciated

https://preview.redd.it/646748qgwiqa1.jpg?width=1816&format=pjpg&auto=webp&v=enabled&s=017bdadb79accde5279b7bbb7c236ede8eab5198

5

Comments

You must log in or register to comment.

of_little_faith OP t1_je1f7ep wrote

I'm an idiot. It did not occur to me until you just mentioned it. This project just got more complicated... Servpro came in to dry out the damage and never said anything about asbestos and I never picked up on it

1

GoArray t1_je1l4f3 wrote

Grocery bag filled with grocery bags making a rough ball. Dip (ie. Load up ball face) and blot, or apply mud to ceiling then blot afterwards, maybe.

1

speckyradge t1_je1m6ib wrote

Lots of different applications of asbestos and they were banned at different times, sometimes state by state. Asbestos isn't outright banned, it's still used in various applications although far fewer than the mid-20th century. It may still be found in brake linings, for example.

1

of_little_faith OP t1_je53uqv wrote

That is kind of how I was interpreting that pattern too. Thanks for the description. Will definitely practice it before trying the real thing! The particular spots I'm worried about are in bathrooms rather than open living space, so less than perfect will be ok.

1