Comments

You must log in or register to comment.

crabapplesteam t1_jdvbkgy wrote

Your submission has been removed for one or more of the following reason(s):

  • Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.

This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.

  • Please do not use /r/DIY as your first stop for questions - we are not Google.

  • Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.

  • Have you already done some basic research and are still stuck?

  • Please include what research you have done in your question so that others do not repeat your steps.

  • Consider posting your question in the sticky thread at the top of the subreddit.

  • Ask your question in our Discord server in the appropriate channel.

Please read our Full Sub Rules before resubmitting.

If you believe this was a mistake, please message the moderators.

###Do not respond to this comment - you will not receive a response.

1

Cespenar t1_jdw8ft6 wrote

It's probably not going to be possible to go lighter, but darker would be easy. Concrete stain as the other guy mentioned. If they're manufactured stone , the color is likely mixed into the material, so you probably can't remove the outside layer to reveal a more base color. You could try chipping away the surface on a more out of the way stone, see if it's a different color underneath. If it is, then you can abrade the color off with a sander, chisel, or sand blaster. If it's solid color all the way thru, your only chance is to dye it darker

1

Affectionate_Leg_686 OP t1_jdw8xuh wrote

I like this suggestion. One thing that would worry me is whether I will be able to remove a layer and not end up with a piece that really looks badly chiseled. I think the dye on the most offering pieces is just a layer on top. This gives me some hope. The grey and beige "stones" seem to have the dye all throughout. Have you tried sandblasting? Any experience with how it will look at the end?

1

Cespenar t1_jdyq21v wrote

I have a portable media blaster I use on various things. I've seen a lot of blasted rocks and block, you'd just have to be careful as hell with doing it installed like that, cus the grout is going to break off way easier than the stone.

1