twiggs462 OP t1_jdns7jy wrote on March 25, 2023 at 8:01 PM

Reply to comment by gunnsrevenge in How you you fix a small concrete statue that is cracked horizontally? by twiggs462

Love the cement sealer idea. Will use JB weld. Need to get a syringe to inject.

gunnsrevenge t1_jdnsye2 wrote on March 25, 2023 at 8:07 PM

They make static mixers for jb weld- syringe like nozzles that mix as you apply. I use similar at work for industrial adhesives. Works great. https://i.imgur.com/wKBIqoX.jpg

twiggs462 OP t1_jdnti63 wrote on March 25, 2023 at 8:11 PM

Perfect! Thanks!

gunnsrevenge t1_jdnuong wrote on March 25, 2023 at 8:20 PM

Should work great. If you have a grinder and enough access grind the opening of the crack a little bit to clean it up and allow better penetration. I also masked off the area around the break with tape to keep the epoxy off of the surrounding area. Be patient Let it cure a good long time depending on your weather. Warm temps speed up reaction time cold slows it down a lot. Good luck!

twiggs462 OP t1_jdnxsph wrote on March 25, 2023 at 8:42 PM

This confirms my suspicions and eases my fears! Thanks again.