[removed]
Comments
DIYuntilDawn t1_iu1ryz6 wrote
See that little tab that sticks out (visible in the 3rd, 4th and 5th photos in your link) you need to rotate that tab over and then the knob can be pulled off, once the knob is off, remove the collar that covers the screws to remove the knobs.
fantasyfanatik t1_iu1ordk wrote
Typically on one of the knobs there's a depressable button that u press on to remove the handle. Then the plate covering the screws can come off.
alxKl OP t1_iu1p45g wrote
Unfortunately, on this one, there is no visible button you can press to remove the handle
fantasyfanatik t1_iu1pazf wrote
Is there a small set screw on the underside of the knobs?
alxKl OP t1_iu1qjvj wrote
There are screws under the knob, but you cannot access them without removing the upper part
Spare_Interaction_10 t1_iu1p72b wrote
Take the knob off, then remove the cover plate and then you will have access to the screw heads
alxKl OP t1_iu1pwte wrote
This is my main problem, I have no way to take the knob off.
Spare_Interaction_10 t1_iu1tl8g wrote
Or the knob my unscrew
DIYuntilDawn t1_iu1s6mt wrote
You need to rotate the locking tab that holds the knob on first.
Spare_Interaction_10 t1_iu1tg0a wrote
There should be a really small set screw on the knob
dasookwat t1_iu1q4da wrote
the shiny cover plates are covers, they 'click' on after you screwed it on to the door. The only thing i can not see is: are they removable without removing the knob?
alxKl OP t1_iu1qo2a wrote
No, unfortunately they are fixed, they cannot be removed
MsPennyP t1_iu1pdqh wrote
On one of the shafts of the doorknobs there should be a little hole, using a small screwdriver pop in there and there'll be a pin that releases the doorknob. Pull off the door knob. The cover plate seems to be popped off mostly but you should be able to pull it off now. Then the under screws should be seen and make it where you can unscrew from the door.
madmiah t1_iu3bq9p wrote
Hack saw
Ember357 t1_iu1r81w wrote
Put a screw driver between the shiny brass flange ( cover) that is over the hard brass disk. it should pop off and show the screws.