Viewing a single comment thread. View all comments

pacnwxplorer t1_iu4m5u6 wrote

I’ve used these with success: https://www.thegrabitstore.com/collections/grabit-pro

4

Fake_William_Shatner t1_iu4u84h wrote

This seems like better advice than the others — if it’s just the screw, why replace everything? I’ve used a hack saw or a Dremel with a thin metal grinding wheel bit to cut a new flathead screwdriver notch in screws if there is enough surface area.

But, a product with a drill and a grabber in one seems like it will be easier and come in handy later.

2

dgtlfnk t1_iu4rw1u wrote

Yep! Was coming to tell OP to nab a set of these. They work great and won’t damage the threads as with some of the other suggestions here.

1