TiddyTwoShoes t1_iu9jof6 wrote
At a glance I would say it'll probably rock back and forth a bit. Run your cross members to the inside of your legs instead of over the top of both. Screws will allow movement and wobbling but a tight fitting board in between the legs will keep it stable. Do that in both directions and it should increase stability while reducing the tables profile
user7618 OP t1_iu9khvi wrote
Makes sense, plus if I ever decide to throw a sheet of plywood under there as a storage shelf I'd already have most, if not all, of the framework to mount it. Thanks!
Viewing a single comment thread. View all comments