Viewing a single comment thread. View all comments

Sklanskers OP t1_iuaibra wrote

Reply to comment by outofmemory01 in I built a simple fence/gate for my house! by Sklanskers

I appreciate all constructive criticism. Since I'm brand new to all of this, I'm happy to hear areas for improvement. With regard to the gate being offset from the fence - I noticed that when it was too late and noted it for next time. I like the idea of a slam board, I'll strongly consider adding it.

Thanks for the other input and advice too. My other gate is also in the process of failing although I don't think ill need to replace the post. I'll definitely keep this all in mind as I rebuild that one. Thanks for your thoughts!

2

outofmemory01 t1_iualp0t wrote

No problem.

The only other 'future suggestion' I have is to look into cable/turnbuckle cross bracing.

As wood expands and contracts eventually all fasteners loosen. A cable cross bracing pulling in tension (which usually means you need X bracing as opposed to / bracing) can be a good long term solution. While it will expand and contract with temperature changes it won't with moisture changes...and as it's a turnbuckle it's much easier to tension or decrease as conditions/seasons change.

You're welcome, and be well. Keep building!

Edit: On the gate...as opposed to a wood 2x4 diagonal.

1