Submitted by NoMuffinForYou t3_ya4etn in DIY
NoMuffinForYou OP t1_it9koed wrote
Reply to comment by WizardOfIF in Odd area in my basement by NoMuffinForYou
I've checked with a studfinder and I know it has wood framing with unusual chest height lateral framing all around as well. That's been my best investigation thus far.
I'd kinda like drill a hole and just peek inside with a tiny camera but I also hate patching drywall....
BeeExpert t1_it9tkft wrote
The more dry wall you patch more you like it. Now go
U_oOkay-Buddy t1_itatans wrote
Just cut a 1ftx1ft square out. Then save the piece if you end up patching it back in. The stud finder can’t really tell you what it is. It could be some sort of old fire place that just has wood furring strips added around the outside to support the drywall.
imnotsoho t1_itaviap wrote
Either use a utility knife to cut in middle of studs and drywall saw to cut the horizontals or use the drywall saw to cut a 1x1 foot hole with a bevel so the cut out piece is easily replaced. Bevel it so the saw tip point towards center of square, put a screw in the center first so you don't lose the whole thing inside the wall.
Viewing a single comment thread. View all comments