Viewing a single comment thread. View all comments

jewishforthejokes t1_iydulch wrote

"Frame wall" is wood or steel, both figure 5 and 6 mention sheathing of "non paper-faced exterior gypsum sheathing, plywood, or oriented strand board (OSB)" as do several others.

The article is written using a bit more academic jargon than colloquial terms and is extremely information-dense, so it's not as beginner-friendly as it could be.

2

osoALoso t1_iye2dy3 wrote

Maybe I didn't look it over close enough but every outside layer was stone or some stone mixture. Vinyl siding is incredibly common and I'm struggling to understand why house wrap, with rigid foam and osb outside should go with no insulation on the interior.

1

jewishforthejokes t1_iyemfyw wrote

Figure 8 but with vinyl siding is fine, which has insulation in the cavity. Vinyl is far more forgiving of a siding material than stone, brick, or stucco so I presume the author didn't find it worth mentioning. Vinyl has lots of gaps so air and water vapor travel freely and it mounts with just nails so there's no brackets causing thermal breaks, so there's almost no way installing vinyl siding can compromise liquid water and vapor management. OTOH it's trivial to install synthetic stucco and trap water somewhere, causing rot and building destruction.

1