Submitted by ExtremeCauliflower76 t3_z4iy4a in DIY

Live in an old house with large backyard that is mostly concrete slabs. Over the years they have cracked and risen unevenly. Two big pieces now slope towards the house and encourage water to pool causing flooding. Anything I can do to raise the slabs back up?

19

Comments

You must log in or register to comment.

Jpalin6 t1_ixr3x1y wrote

Yes, it can be done. Years ago, we had our front concrete walkway leveled to address water flow also. They used a massive crow bar to lift the slabs, regraded the ground, added filler and replaced the concrete slabs. Not sure if this works with severely cracked slabs. Good Luck!

3

Mesoposty t1_ixrcuub wrote

They can also drill holes in the slab and pump grout under it too lift it. It can work very well

8

reb678 t1_ixrrwsk wrote

Here is one company's way of raising slabs

3

ExtremeCauliflower76 OP t1_ixrsjut wrote

That’s awesome. That’s exactly what I was thinking too. Can that be a DIY job? Truly doubt there is anything like this company where I am ( N W Ontario)

2

reb678 t1_ixruhcu wrote

This is how one guy did it. Look on You tube.

Personally, I would hire someone. If they they messed up it would be cheaper than if you messed up, y'know?

Here is another way

3

ExtremeCauliflower76 OP t1_ixruqjw wrote

I’m researching a local shop to do so… worried there won’t be much available if at all where I am.

1

[deleted] t1_ixw7hul wrote

I have leveled/moved sidewalks and a concrete patio using this method. Floor jack, shovel, and a new substrate. Dig a hole under the slab, insert floor jack to lift and apply new substrate to level. You can easily move a slab by inserting a few thick wall pvc pipes, 4", under the slab and roll them away.

2