Comments

You must log in or register to comment.

ww_crimson t1_ix50dgx wrote

Visit /r/autodetailing and search for car seat and steering wheel repairs. There is a guy who has posted like 10 of them and he walks through his products and process

3

DotAccomplished5484 t1_ix50xoj wrote

You seat is pretty much shot.

You cannot repair it to look good. The best you can do is get a heavy cloth patch of a similar color, cut the patch so that it is larger than the torn area and insert the patch into the hole. Apply flexible fabric glue to the patch where it is under the seat coving, place a sheet of wax paper and then a weight on the patch for several hours.

It will look like an obvious patch, but it probably is better than the open hole

2

rpapafox t1_ix4wizq wrote

It looks like naugahyde. The texture is going to make it near impossible to mend. You are better off recovering the entire seat.

1

Guygan t1_ix50hyr wrote

  • You are asking how to "get started" on a project.
  • You are asking what is the best method or approach to a project.
  • You are asking whether or not you should do a project.
  • You are asking for advice on what project you should make ("what can I make within my budget?")
  • If you have a project in mind, please do some basic research on the matter, come up with your plan, then you can ask about a specific aspect of the project.

We want you to get the help you're looking for. If you have any of these questions, some places to get help are:

  • Ask your question in our Discord server in the appropriate channel.
  • You may also try other subreddits - /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your question.

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.

1