Viewing a single comment thread. View all comments

Ma1eficent t1_ixjlkjc wrote

There's quarter round attached to the baseboard? WTF. This was installed totally wrong. It does need the expansion gap, it should be under the baseboards, and no quarter round should be needed. Installing mid summer on a hot day is the best plan, but with a proper expansion gap hidden under the baseboards, should never buckle. I've installed my own LVP planking and it hasn't buckled at all.

0

NotWorthTheTimeX t1_ixkn38a wrote

It’s very common for renovation installs to add quarter round rather than remove and reinstall baseboard.

2

MotherofTerrier OP t1_ixl3tnb wrote

The baseboard and the quarter round were installed after the flooring. I’ve heard of people doing what you are describing though.

1

Ma1eficent t1_ixn3d3k wrote

Shit renovations. It's so easy to pull the baseboard and replace.

1

NotWorthTheTimeX t1_ixn48hh wrote

So you like repainting walls when the touch ups don’t blend well? It’s all about personal and customer preference.

1

Ma1eficent t1_ixn58xm wrote

Never had to touch up for that. Run a utility knife on the top of the baseboards and take them off with a gentle pry. The LVP floating floor raises it up a 1/4 in or so, replace and run a bead of caulk it a baseboard color match. Done.

1

NotWorthTheTimeX t1_ixn60kb wrote

I’m betting you did one room in your own house like this. If you did more you’d know it’s a can of worms when you remove base. Sometimes is comes out clean, other times it’s like they made the base structural and you just created a ton of extra work for yourself due to the junk original builder’s work.

1

Ma1eficent t1_ixn6wcl wrote

Front room, kitchchen, hallway, two bathrooms, 3 bedrooms after carpet replacement, and rec room on this house, and the entire thing on a previous. Plus helped a friend do their entire basement. But do go on making up reasons to feel better about cutting corners.

1

NotWorthTheTimeX t1_ixncav8 wrote

If you truly did all that then you would have at least a handful of trouble spots. No wall is perfectly straight. Often there’s deep areas of caulk at pull the paper off the drywall.

1

Ma1eficent t1_ixnghlt wrote

If you're pulling drywall paper you didn't cut fully. Of course the walls aren't straight, if you are prying and it's trying to.pull paper you just score it at the top of the baseboard.

1

NotWorthTheTimeX t1_ixni09f wrote

I appreciate how much you don’t know. On larger gaps the caulk can run down below where you’ll never know until you start pulling. You should only score caulk and not the paper. Often, walls aren’t even finished all the way to the bottom. There are many good reason to add quarter round.

1

sameteam t1_ixkxf7o wrote

This is how you know you have a ghetto ass contractor.

0

NotWorthTheTimeX t1_ixkxtns wrote

Not at all. It’s an installer’s choice what services to offer and a customer’s to accept. I once installed 700 sq ft of LVP with upgrading the baseboards to modern style ones. Later the customer asked me if we could still add quarter round because they thought it looked more elegant. I didn’t have time to do it but to each their own.

1

MotherofTerrier OP t1_ixl3niz wrote

The flooring was put down first, baseboard and then quarter round. So the baseboard and quarter round are on top of the LVP. I personally like how finished it looks with the quarter round. Glad to hear yours hasn’t buckled 🙂

1