Viewing a single comment thread. View all comments

1feralengineer t1_ixq7yir wrote

If you can find an oil/solvent based sealer in your area, that would make the sealing, sanding, sealing part the smoothest.

If you are doing it with a water borne finish, then you want to use a high solids content sanding sealer.

If you want smooth, not sure why you are rolling it instead of spraying it.

2

danjr704 OP t1_ixq9dvc wrote

I was just concerned about the aerosols in my basement as its not too well ventilated, plus I didn't want to get air bubbles. Usually im better at painting by rolling compared to spray. Additionally more color options if I didn't use spray paint.

Any idea as to what kind of paint I could use for the primer and actual color paint if im rolling?

0

1feralengineer t1_ixqbbwo wrote

More color options? You can spray any paint that can be rolled.

I would go to an actual paint store (not a big box hardware store) for your paint. For durability, buy the best you can afford and (generally) the greater the sheen (gloss) the greater the durability. Have the store tint the primer.

And finally, cover the final paint with a high quality clear coat (this will add durability, less likely to show scratches than paint, and then you can also adjust the sheen to what you want regardless of the paint's sheen)

3