Viewing a single comment thread. View all comments

sfzombie13 t1_ixynhcz wrote

wrong. 15/32" is 0.46875" while 11.7mm converts to 0.46062992125984253" according to one place i looked.

−7

Peppyperoni t1_ixyq33f wrote

I don't think it's an aerospace grade drywall anchor. I think a 0.008" tolerance will be acceptable.

22

sfzombie13 t1_ixyxlbe wrote

did you read the other comment? must've missed the part where it said "pls correct me if I'm wrong"...

also, if op is using a drywall anchor in brick, something else is gonna happen regardless of the tolerances.

−17

Peppyperoni t1_ixz52kn wrote

Sorry to interupt your hair splitting. Did you read op's post? Looks like a drywall anchor to me.

1

sfzombie13 t1_ixz6fbc wrote

i didn't say it was or wasn't, i said if op was using a drywall anchor there something else was gonna happen. i don't know if they'll work, i use the correct things whenever i can. op also said tapcons were hard to come by down there. yeah, i read them all.

−11

The_cogwheel t1_ixz54se wrote

Found the pain in the ass engineer every tradesman hates.

Seriously, 8 thousandths of an inch is entering the territory of CNC machining, not hanging a hose reel.

9

Just_wanna_talk t1_ixzvo8t wrote

I mean, technically he's right. If it truely were simply a 15/32" conversion it would have worked out to roughly 11.9mm.

Either they converted it wrong, or it wasn't originally 15/32"

Otherwise they would have stated 11.9mm instead of 11.7mm

−1

sfzombie13 t1_ixz6ico wrote

when someone asks for folks to correct them if they;re wrong, why do others feel the need to say something about the correction? piss off.

−8

AccidentallyUpvotes t1_ixzfqi3 wrote

"Correct me if I'm wrong" usually means one of two things;

  1. correct me if I'm wrong enough to make a material difference, or if it means my guidance would cause a problem if not corrected

  2. correct me if I'm wrong which I'm not, but I'm trying to be polite about it.

5

sfzombie13 t1_iy15v0v wrote

and? op makes a comment, asks for corrections, i give one, and you're upset about it. piss off loser.

0

The_cogwheel t1_ixz7gm4 wrote

Do you understand how small 0.008" is? A human hair is 0.003".

You're literally splitting hairs just so you can walk around pretending you're clever.

3

alistair1537 t1_ixzvjit wrote

I think you should explain that you're OCD - like Rainman - to everyone, 'cause at this point you're just a jerk.

1

sfzombie13 t1_iy15nrx wrote

yeah, just move on along buddy. or piss off, doesn't matter to me.

0