xrr88x OP t1_ixvdd0w wrote
Reply to comment by DotAccomplished5484 in Help. Ring doorbell and existing chime by xrr88x
What do you mean by jump across the 2 wires? And is this at the chime or the actual ring unit?
DotAccomplished5484 t1_ixvjs3m wrote
There should be two very thin wires attached to the doorbell that make a connection when the door bell is pushed. That is what activates the doorbell. They should be approx. 20v. Connect the two wires by touching with a piece of wire that still has the sheathing everywhere but the ends.
xrr88x OP t1_ixvlcl4 wrote
Thanks for the help I’m going to get the jumper and the chime just in case the jump doesn’t work and return the unused stuff.
Viewing a single comment thread. View all comments