Comments

You must log in or register to comment.

DickweedMcGee t1_iy70ja8 wrote

Good news: Its easy enough for any homeowner to fix. Bad news: Kiss your weekend goodbye:

1.) Cut off any loose peices

2.) Skim coat with drywall compound, make sure the mud apllication extends past the torn paper at least 1 inch.

3.) Let it dry

4.) Sand drywall compound with drywall sandpaper(its a mesh)

5.) Repeat steps 2-4 until you get a uniform, even surface

6.) Paint over the new drywall compound with a primer or primer + paint. A primer seals the fresh drywall which, otherwise, would absorb several applications of regular latex paint making a long job, even longer

7.) Paint with a latex paint of your choice.

8.) Do whatever you need to do to get those cats to not do this again.

7

downheartedbaby t1_iy7153z wrote

I see missing paint, but it is hard to tell from the photo how deep the damage is. It looks like it is deeper than the paint layer, so it might be best to replace the drywall in that section because it might be difficult to smooth it out enough to apply paint.

If the surface is still fairly smooth but the paper is ripped off, you could try applying something like Gardz to seal the surface. This will make it easier to skim coat. Then prime and paint.

Edit: you can also do this without Gardz but plain brown paper will suck the water out of your compound mixture and it will make things more difficult.

2

ContractRight4080 t1_iy718lh wrote

Keep their nails trimmed too. I adopted an older cat a while back and the previous owner had gotten its claws removed which I thought was a bit extreme but I quickly figured out why. He has a habit of scratching the walls, even with no claws he still does it. I can’t imagine the damage he was doing. You can also get little caps to put over their claws too.

4

Guygan t1_iy7p7tm wrote

  • Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.

This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.

  • Please do not use /r/DIY as your first stop for questions - we are not Google.

  • Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.

  • Have you already done some basic research and are still stuck?

  • Please include what research you have done in your question so that others do not repeat your steps.

  • Consider posting your question in the sticky thread at the top of the subreddit.

  • Ask your question in our Discord server in the appropriate channel.

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.

1

DickweedMcGee t1_iybnhd4 wrote

Just make sure you put some drywall compound and paint to seal up the exposed drywall core before you put the wood paneling down(not a bad idea btw...). It doesn't have to loom pretty. Otherwise you're likely to get mold, moisture and maybe swelling. Latex paint does a lot to ensure the longevity of the drywall in your home.

1