Viewing a single comment thread. View all comments

Klai8 t1_ixax3iw wrote

In addition to what the other comment, there are roll on acid solvents that you put on and make it WAY easier to come off

20

repstein26 OP t1_ixaz4km wrote

Something like this? https://www.homedepot.com/p/Rust-Oleum-1-gal-Concrete-Etch-and-Cleaner-301242/206495770

3

Klai8 t1_ixazul3 wrote

Yep—I know it says to use it on floors but I’ve seen people use it on walls too. Also make sure whatever brush or roller you use is a material that it won’t melt (like cotton).

Even just a nylon paintbrush or rubber roller should work but ofc read the instructions

IMPORTANT EDIT: do NOT use an angle grinder and steel brush is you use this stuff lol. You will have to scrape it by hand after but it comes off like butter peel

13