Viewing a single comment thread. View all comments

TiMouton t1_ivj5gmj wrote

Weld in some extra pipe stock. Gotta be a good weld though. It’s a uniframe so it needs to flex a lot and carry all the weight.

Otherwise you could try to install casters where the plastic feet are. Should give you about 5cm clearance.

1

SkwrlTail t1_ivj5wdv wrote

Doesn't necessarily have to be welded. Cut the legs, slip a larger pipe over it. Problem there is as noted it's going to be flexing and bearing load differently.

Don't drill out space for the casters though. That'll weaken the metal tubing and you'll snap the thing in half before you know it.

2

TiMouton t1_ivj6149 wrote

Thanks for pointing that out! I think it’s gonna be hard to install casters without drilling holes…

2

SkwrlTail t1_ivjaxxx wrote

That's the problem with pipes - they're really strong up until they're not...

Could lash it to a furniture dolly!

1