Viewing a single comment thread. View all comments

jayeshsondhi OP t1_ixxd6zl wrote

Reply to comment by NortWind in Floorboards restoration large gaps by jayeshsondhi

Its on the 1st floor, so I could remove these pieces and access the joists if that is what you mean?

1

NortWind t1_ixxepte wrote

I was thinking you might have to seal between the boards. The easiest way would be to tape up the bottom, and flow in coats of polyurethane varnish, and allow to dry between coats. Then power-sand everything. At least you would be able to wet-mop the floor.

0