Submitted by HourOrganization4337 t3_zqyid2 in DIY
JonJackjon t1_j10pnb4 wrote
As stated you will have to take it apart. Actually I just did the same thing with my similar lock. I cleaned it with WD-40, then alcohol to remove the WD-40 (because it will stick when cold) and lubed it with graphite dry lube.
You will have to remove the bolt and clean that as well.
I think this is pretty simple, not a lot of intricate parts to deal with.
HourOrganization4337 OP t1_j10qkka wrote
Hi I just took it apart, I don't know what to look for, just wipe everything clean & regrease?
JonJackjon t1_j11xaxd wrote
I didn't look for anything. I sprayed the whole mechanism with WD-40 moved the parts by hand many times. Make sure the mechanism operates freely. Wiped off most of the WD-40 with a paper towel. Lubricated with graphite and reinstalled.
Viewing a single comment thread. View all comments