Submitted by HourOrganization4337 t3_zqyid2 in DIY
ToolMeister t1_j11309q wrote
Reply to comment by HourOrganization4337 in doorknob is difficult to turn by HourOrganization4337
Now that it's taken apart, does the knob and spindle rotate without issues? If yes, then the latch is your problem. Next, see if the latch moves freely. If it doesn't, clean and re-lube. If both parts work good while taken apart, then the assembly on the door was the problem, i.e. mounted too tight/at an angle etc.
HourOrganization4337 OP t1_j113vxn wrote
Spindle rotates good, the bolt is able to spring back after pushing in, don't see anything moving behind the mounting plate.
HourOrganization4337 OP t1_j1148gx wrote
The bolt doesn't push in all the way either
Viewing a single comment thread. View all comments