Submitted by FatFart777 t3_zrx1nb in DIY
armouredqar t1_j15fqu2 wrote
The underfloor heating - was this electric set in under the tile, or liquid from a boiler?
If it's from a boiler, sounds like something set up incorrectly to me.
If it's electric as others have suggested - should be set to some lower output level and to come off and on more frequently, so that the tiles at least stay warm. Is this underfloor the only source of heat in the room?
FatFart777 OP t1_j16jndp wrote
thank you! not sure what their was, but ours will be liquid. and based on everyone's help, we'll make sure to set it up correctly from the start.
armouredqar t1_j16oqha wrote
I'm going to guess that their system was something different at core (like electric) or something very wrong with the set-up.
For yours I guess others have laid it out - the temperature of the water flowing through should be moderate. I've had a mixed system of rads and floor, and quite clearly distinctly different loops and temperature settings (note some rads can be designed for low temperature).
For our radiant flooring, the heated flooring sections are never cold - they move slowly in heat terms, so even if the heat was cut off it would take hours to get to 'cold'.
FatFart777 OP t1_j16oxvc wrote
Awesome, thanks!
Viewing a single comment thread. View all comments