https://imgur.com/a/6YvJn76

Following I have this same issue but on one side only.

Is it even all the way across? If so, there’s usually a close distance adjustment on the opener motor.

It’s not the middle is higher

Buy pipe insulation. cut it down to the size and length you need and push it in the seal at the bottom of the door. Cost you less than $10 and you'll have extra. You could also use a pool noddle and do the same thing.

This is a great idea. My only worry is that it’ll hook on the frame once it opens. But I’ll definitely try this out! Thanks.

Push it into the edge of the bottom seal. It will be fine both of my garage doors are that way.

Your submission has been removed for one or more of the following reason(s):

• Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.

This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.

• Please do not use /r/DIY as your first stop for questions - we are not Google.

• Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.

• Have you already done some basic research and are still stuck?

• Please include what research you have done in your question so that others do not repeat your steps.

• Consider posting your question in the sticky thread at the top of the subreddit.

• Ask your question in our Discord server in the appropriate channel.

Please read our Full Sub Rules before resubmitting.

If you believe this was a mistake, please message the moderators.

###Do not respond to this comment - you will not receive a response.