I have to create a new bedroom and build a wall in the back section of a rental. I have roughly 3 weeks to accomplish this and not a lot of money. If I don't have it done, then I can't have my kids all weekend. They need separate bedrooms and I'm giving mine to them so they each have a room. So I have to create another one for me. I'm really tired and mentally exhausted from everything and could use some help with ideas. Please.

Comments

You must log in or register to comment.

cooldude_4000 t1_iyrmc34 wrote on December 3, 2022 at 4:59 PM

I dunno if this will be good enough for your purposes, but a lot of the time when offices go out of business, they'll often sell off their cubicle partitions and stuff cheaply. Check Craigslist.

lurk4ever1970 t1_iyrw6tl wrote on December 3, 2022 at 6:06 PM

If you have a vehicle that can haul them, get a few cheap hollow-core interior doors and some hinges to create a partition. Set it up in a zig-zag pattern and it will stand by itself.

peachesdonegan56 t1_iys09vg wrote on December 3, 2022 at 6:35 PM

Used tall bookcases. Also add a storage. Good luck.

iamF1 t1_iyrlwfb wrote on December 3, 2022 at 4:56 PM

Pretty much this.

However, with it being a rental you may want to check that you are allowed to do it.

Good luck mate

iamF1 t1_iyrlxxc wrote on December 3, 2022 at 4:57 PM

https://youtu.be/JYI9m2nH3vY

gojohandjob t1_iysg7x8 wrote on December 3, 2022 at 8:26 PM

That’s not temporary though

Resting_burtch_face t1_iyrniyo wrote on December 3, 2022 at 5:07 PM

Hang bedsheets from the ceiling.

Sudden-Shine OP t1_iytucp0 wrote on December 4, 2022 at 2:50 AM

These are all good ideas and I think I can combine a few of them to suit it well. I hope it works out and if I am able to remember I'll post an update. Thank you guys so much.

tameriska t1_iytsgcq wrote on December 4, 2022 at 2:34 AM

My first thought would be to grab some cube storage bookshelves with backs, and use them as a dividing wall. Alternate the way each one is facing, and dividing wall and storage all in one. Screw them together for stability

Stellar-Polaris t1_iytsuy1 wrote on December 4, 2022 at 2:37 AM

I found this video that I hope gives you some good ideas.

https://youtu.be/n0aRJFAIh-U

Tomcat218 t1_iyuko07 wrote on December 4, 2022 at 7:13 AM

How about Theatrical flats. 4x8 sheets of luan (3mm or 5mm plywood) on a frame of 1x3 or 1x4. Screw them together, and tack them to the floor, or weight them down with something heavy. An air powered brad nailer/stapler will help them go together quickly. Lots of info about this on the web. Good luck.