Comments

You must log in or register to comment.

DeltaBravo1984 t1_j1xlnf5 wrote

A water softener will cost you way less over the long run, but it's a decent initial investment

7

doge_vader OP t1_j1z610j wrote

Thanks. I've looked into softeners but they are a bit costly where I live and I'm not planning on living here more than a year or two. So looking for sort of short term solution.

1

mrpasciak t1_j1xp6iv wrote

Water softener and whole house filter will get rid of all that.

5

INoahABC t1_j1xtifm wrote

Water softener is a must if you live in hard water areas. You can look up your towns water hardness index with a quick Google search. A water softener is what you are looking for, and if you know basic plumbing you can install one for around $500. It takes salt that you can get from anywhere. It's amazing. It will make the water feel slightly slimy but no more hard water stains, clogged bidets and showerheads will look clean. When you do need to clean all the hard water stains off, use vinegar. You need an acid to get the stains off and this works really well. You can even remove showerheads and dump them into a bucket of it overnight.

4

doge_vader OP t1_j1z6ggp wrote

Thanks for the advice. What do you think of something like this. I'm not sure if it would work or not.

1

INoahABC t1_j1zgi31 wrote

I see you're in India! I'm not sure how that product works but the reviews look promising? The hard water softeners I was talking about rely on city water coming into your house under pressure. Not a tank system that needs to be filled. So I really don't know for your case. But as long as it removes calcium and magnesium it'll make the water soft.

1

Rellgidkrid t1_j1xryfs wrote

Think about nuns playing baseball

2

doge_vader OP t1_j1z6mcw wrote

Haha it's gonna get even more hard. My pipes are gonna be full of sediments.

1

Foraxenathog t1_j1xw75p wrote

Stop putting it in the freezer.

2

gpuyy t1_j1y3ulb wrote

But my schedule is so busy that I simply have to pre boil some then freeze it for meals later…

1

Guygan t1_j1y6g0c wrote

  • Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.

This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.

  • Please do not use /r/DIY as your first stop for questions - we are not Google.

  • Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.

  • Have you already done some basic research and are still stuck?

  • Please include what research you have done in your question so that others do not repeat your steps.

  • Consider posting your question in the sticky thread at the top of the subreddit.

  • Ask your question in our Discord server in the appropriate channel.

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.

1

Pretend-Candidate568 t1_j1ywkgw wrote

It all depends on the source/cause of the'hard water'. Ask folks in your area?

1

doge_vader OP t1_j1z721w wrote

It's kind of a bore well for housing community. They are planning to switch to city's water which is much better but it's kind of slow process. There's also a castor oil mill nearby, could it be polluting the soil?

1

Pretend-Candidate568 t1_j2ep9s9 wrote

The castor should be pretty safe as the heat destroys the toxin in the raw seed.

Try a simple carbon and sediment filter . Think that will be pretty standard. So unless you're in a high farming community or cattle that may taint the ground water - should be good. You can take a sample unfiltered and have it tested for bacteria etc. If there is any, the community should address that as a whole.

Good luck in the shift . I'd still use a carbon and sediment filter on city water. :)

1