Submitted by UniqUzrNme t3_zw6ugn in DIY
UniqUzrNme OP t1_j1t7m8b wrote
Reply to comment by ReallyGene in Help - wiring switched outlet (U.S.) by UniqUzrNme
Thanks, I’ll check again, but I looked at this a long time when I made the diagram. If it’s wired wrong, might explain why I didn’t find anything online that matched it. I didn’t wire it, but, it works now to switch the fixture.
DragonsBane80 t1_j1taeyk wrote
Totally would work if the neutral is switched, but it's not safe. It means the fixture is always "hot". In the end, it's not likely to cause problems, but it's backwards.
Really this boils down to your switch. Does the white or black wire run to it? Unless it's a smart switch, it will only have one, not both.
As far as adding a on to that circuit, you can tap into whatever is down stream (ie a light) and run a new line (white/black/ground) from that light to your outlet.
You can do the same from the switch itself also, but that's more of a fauxpau
Viewing a single comment thread. View all comments