Maxheadroom206 OP t1_iz3oodl wrote on December 6, 2022 at 5:47 AM

Reply to comment by StrikeParticular9503 in Can I use an in-wall European Light Fixture if I use a USA compatible 110v bulb? by Maxheadroom206

Thanks for all the detailed insight. I think the USA LED bulb looks to be the same lengthen and socket type as the Int’l version but the backing plate is certainly an item I would need to address in order to be in compliance and avoid fire risk. I am awaiting a response from the manufacturer and will contact an Electrian I know.

StrikeParticular9503 t1_iz413wn wrote on December 6, 2022 at 8:32 AM

Regarding fire risk, keep in mind if you or someone in the future installs the wrong light bulb in the fixture than what it is intended/labeled for (i.e. non LED instead of LED, or higher wattage than the fixture is rated for - even LED). Construction and labeling between these two fixtures are not the same, I suspect. Side note: even though LED is lower wattage it might get hot from a fixture testing standpoint so be sure to go with rated wattage per fixture manufacturer regardless.