Submitted by floin t3_zjd126 in DIY

There is growing discoloration on my ceiling that I believe may be due to a PEX waterline leak in my attic. To inspect, I need to pull up some of the OSB subfloor installed in the attic during the original build. The OSB sheet seems to be supporting a roof strut, which is bracing the roof. What’s the safest way for me to get under the subfloor without compromising my roof?https://imgur.com/a/A0IxK2u

0

Comments

You must log in or register to comment.

ToolemeraPress t1_izw22j8 wrote

Step back from that mess. You need a good framing carpenter to properly replace all that is missing. Don’t let your home insurer know.

5

ProKLAK t1_izwlnjt wrote

Wtf is this abomination

3

ichbineinschweinhund t1_izuvwv4 wrote

That's some scary shit! I've never seen that in my life. It's hard to imagine that piece of framing is really supporting anything with three nails in the OSB! Having said that I would do two things: 1. Use a circular saw to cut out enough of the OSB to observe the Pex and make any repairs 2. Call an engineer/contractor/building inspector to look at that abomination and tell you if it's actually supporting anything.

1

John_B_Clarke t1_izv89wh wrote

This looks like some idiot removed structure to get clearance for ductwork and when he realized that things were about to fall on his punkin' haid rigged something to keep it from happening long enough for him to get paid and skip town. You really need to get somebody who knows what they're doing to eyeball the situation and tell youu what needs to be done in the way of a permanent fix.

1

party_benson t1_izwb4wi wrote

I'm just trying to figure out what the heck happened with all those boards. Is it supposed to be holding something up? Why is there a burnt section? Who did this?

1

Interesting-Dish8894 t1_izug0yx wrote

I’m just going to pull it out. That is definitely not something that is per the blueprints for that house. Somebody just added that later.

Then fix your leak and look at the roof and try to figure out why that is there and if your roof needs support then redo a more correct way

−2