Comments

You must log in or register to comment.

fuckitweredoingitliv t1_j25brma wrote

First turn off the breaker for the light then get needle nose pliers and open them inside the metal part of the light and twist.

14

LordRednaught t1_j25d5zb wrote

You can use clay or play-doh in place of a potato.

8

Linuxxx t1_j25bv2b wrote

Verify that the power is off (at the breaker is best). . Re-verify that the power is off with a voltmeter.

Once you are sure that the chances of getting zapped are as close to nil as you can get them, you can use insulated needle nose pliers to spin the old base out.

3

Thatsmrdrew2u t1_j25busd wrote

Making sure the power is off first to the light. You might have to use some needle nose pliers to grab the outer metal edge of the broken bulb and twist it out. Again making sure there is no power to the light socket first

2

Disappointed_Echoes t1_j25bwmm wrote

Make sure it's unplugged and use a needle nose plier to grab the lip where the glass used to meet. See if it'll teist out

2

disciples_of_dissent t1_j25btdb wrote

Unplug the appliance, and use a needle nose pliers to grab the edge.

1

MaleficentPi t1_j25fd7s wrote

Flip the breaker.

Get a electric tester to make sure there is no current.

Grab it with pliers and twist out.

My grandfather used potatoes.

He got electrocuted a lot.

1

Guygan t1_j25g3zo wrote

  • Your post was regarding cooking, cleaning, general maintenance items.
  • Your post was regarding sewing, general automotive repairs, cosmetics.
  • Your post was regarding software design, solely CNC, 3D or laser printing.
  • Please consider submitting these projects to /r/crafts, /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your project.

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.

1

TunaOnWytNoCrust t1_j25ggwx wrote

Pliers, insert opened into the inner lip. Pull pliers open so the jaws expand outward applying pressure on the inside of the lightbulb cap. Keep applying pressure and rotate the lightbulb cap out.

1

-Hell-_-Boy- t1_j25dmj8 wrote

turn off power. get a spare plastic bottle. Heat it's mouth. stick on to the bulb. let it cool. twist open.

−1