Viewing a single comment thread. View all comments

jsm7464 t1_j21cpaj wrote

The easiest way to cut crown under 3-1/2”. Put the crown on the miter saw upside down from the way it should be installed. Scribe a pencil line top and bottom on the table and fence of the saw. Now, you can just cut 45° miters for inside and outside corners. Just hold your crown on those marks for the next cuts.

4

Own-Pea-8212 t1_j21kxn3 wrote

This is the best answer so far.

​

Follow the same process of marking the wall and ceiling every few feet to make sure the crown doesn't roll on you and viola.

2