Comments

You must log in or register to comment.

bkcarp00 t1_j1kww4h wrote

No need for it. Someone simply thought it would look nice.

16

ClawhammerLobotomy t1_j1ky3yl wrote

It isn't (or shouldn't be) structural if that is what you're wondering.

Mine are just stacked bare.

3

makinghsv t1_j1kzfpe wrote

It's typically just to save space

20

Justin429 t1_j1l0sk1 wrote

In addition to what others say, I'm sure it also reduces the noise somewhat.

27

2001sleeper t1_j1l1vx6 wrote

For looks and to reduce noise. You really shouldn’t have to work on a washer or dryer too often.

15

Xeno_man t1_j1l2q72 wrote

Some places people are forced to have their washer on the main floor. People don't like looking at a washer and dryer all of the time. The cabinet is purely for ascetics. You might get a bit of sound dampening but it's not the point of the cabinet. Feel free to remove it if you don't like it.

4

GiantWafflePancake t1_j1l6cbx wrote

Mainly Aesthetic I suppose. I’d probably have built it slightly wider so I can put some stuff in it.

2

chumpyis t1_j1l7uq8 wrote

Looks like it’s blocking your electrical panel. If that’s so it’s a code violation. You are required to have 36” clearance in all directions (a good visual is the space a refrigerator would take up) it’s a danger if something goes wrong.

8

ConstructionFar8570 t1_j1l8ryq wrote

It is so when you have a nice expensive home you don’t have to see the washer dryer lol.

3

Klangmeister_RS161 t1_j1las7o wrote

Probably not in any significant amount in the particularly problematic frequencies and might actually amplify some frequencies. Could be helpful for reducing high-frequency noise in the room, though. Speaker cabinets, which do reduce sound emissions, have a fairly involved build process and require particular materials (e.g. MDF), which I doubt someone would do for a washer-dryer cabinet.

1

Markaes4 t1_j1lbta4 wrote

As others said I can't imagine any reason you need the cabinet other than to hide the appliances... I suppose in theory the cabinet could keep them from tipping from vibration or if the leveling is off. But I would have some concern about heat, leaks or accessing the vent.

1

TrawlerJoe t1_j1ljdpi wrote

In your case, it looks like their is an open stairway next to it. If so, could be there as added safety to help prevent the dryer from tumbling.

(Sorry for the pun. I'll show myself out...)

EDIT: just realized the photo is an example, not yours specifically.

1

Doenicke t1_j1ljga8 wrote

At least in our case we have the drier on top of the washer because of space.

1

Peter_Falcon t1_j1ll0pu wrote

surely the obvious answer is it saves floor space?

1

Guygan t1_j1ln4pa wrote

  • You are asking about a project that someone else did.
  • You are not asking a question relating to something DIY.
  • You are not asking a question at all.
  • You are submitting a "DIY Tips" or "Tricks" post.
  • You are trying to submit a survey / fundraiser.
  • You are asking what an item is called - try /r/whatisthisthing.
  • /r/DIY allows only two types of posts - finished projects & help requests.
  • If your submission is neither of these - it will be removed.

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.

1

HTFTaco t1_j1lndnc wrote

People saying to reduce noise have never compared waving your arm in the air and then waving it between two planks and see what makes more noise. A dryer tumbles. Which makes it shake, if you shake up against two planks you going to end up with MORE noise. Besides what kind of moron do you have to be to put a dryer, which generates huge amounts of heat, in a small, confined space with nowhere for the heat to go.

0

koookie t1_j1lo8zs wrote

Attempted noise reduction :-)

>what kind of moron [...]

The kind that blocks an electrical panel.

The post is removed now, but the panel was blocked as mentioned in another comment.

1

elisdee1 t1_j1pzvwe wrote

Yes, to confound people so they write whole posts about it on Reddit.

2