Viewing a single comment thread. View all comments

JonJackjon t1_j2f9pxc wrote

I see two possible solutions using 3M tape.

  1. The 3M VHB is the strongest however your tile has some pattern and the amount of contact with the tape could be an issue.
  2. 3M Heavy duty foam tape is not a strong as the VHB but it is more tolerant of non flat surfaces.

In either case the surfaces must be very very clean.

Removal of either can be performed by getting some thin steel picture hanging wire or craft wire. Using the wire you can "saw" down through the tape. Then you only have to remove the residue, not easy but doable.

4