Kolada OP t1_j5w2703 wrote on January 25, 2023 at 11:27 PM

Reply to comment by brock_lee in Washer not draining after supply line burst by Kolada

Might give this a try first, thanks. It wasn't submerged, but the water was staying at the back of the washer for days so I would be surprised if waster didn't make its way in.

brock_lee t1_j5w2ept wrote on January 25, 2023 at 11:29 PM

I should have been more clear, too. It is a common issue where that tube gets clogged, and the washer can't tell if there is water in the tub, so shuts down, leaves the tub full, and won't spin or drain. I replaced my washer recently, but I had to do the clearing of this tube maybe four times over the years. Again, I don't think it's likely here, but worth a shot. You may even see something when the washer is open.