Submitted by EdwardJMunson t3_10osgu1 in DIY
kittenrice t1_j6h38lj wrote
It's a fresh air make-up, the idea being that new homes are so sealed up, if fresh air isn't introduced through a vent, rather than all the gaps, leaks, and shitty build quality, people might get woozy, unless they happen to open an outside door once or twice a day.
Anyway, it would be better if there was a barometric damper on the vent so that it only lets in air when the pressure inside the house is less than outside.
Better still, they're now hooking the end of the duct to the return, so that the outside air gets heated or cooled instead of just being dumped into the home at -15F.
You didn't hear it from me, but most people just stuff them with towels or find a bucket that fits.
Oh, and, no, CO isn't going to be sucked into your home, ffs, the furnace would know about that and turn itself off. That's actually one of the very few things a furnace is smart enough to do.
jinbtown t1_j6ijeim wrote
You have no idea what make up air in a utility room is for.
If your kitchen exhaust fan is running and your atmospheric vented appliance is also running, it can absolutely suck the CO exhaust right into the house. People have died from this - that's why on new builds, it's required by code to have a flue damper sensor so they know if the exhaust is being pulled into the home. OP may not have this. 99% of furnaces do not have the capability to detect CO or O2 levels.
EdwardJMunson OP t1_j6h4mh4 wrote
This is super informative, thank you!
jinbtown t1_j6ijh5o wrote
they are wrong on a few points. Do not cover or block your source of make up air unless you are positive you know what you're doing.
EdwardJMunson OP t1_j6iu464 wrote
Roger, thanks.
Viewing a single comment thread. View all comments