ezbake_fpv t1_j430se4 wrote on January 12, 2023 at 8:47 PM

What you need is a small, extremely simple mining car set-up, so look at how-to mining literature. Historical stuff should be loaded with calculations you might need to consider. Another good place to start would be to look at roller coaster lifts, and the like, along with diy backyard roller coasters that people have built. I would think you are mostly limited by your available skills and budget. If you can weld, and are fairly mechanically inclined, this should be a piece of cake. There are no-weld options as well. Steel is damn pricey these days, at least it is in my parts, so without some source of surplus materials, it might not be worth it. That is, not until you need it one day, and don't have it! Lol good luck!

oldcrustybutz t1_j433xil wrote on January 12, 2023 at 9:06 PM

some of the old L shaped iron rails on wooden tracks that were used well into the 1800's in mines (because they're light..) wouldn't be that hard to reproduce for a straight run.. Combined with an electric winch set on a deadman at the top (inside a covered cart stop..) and you'd have a pretty cool system.

ShortenedCurler t1_j43d9du wrote on January 12, 2023 at 10:01 PM

ATV winch with remote, and a garden cart.

knoxvilleNellie t1_j432x4q wrote on January 12, 2023 at 9:00 PM

I rented a house in New York on a lake during Christmas of 2021. The house set well below the road, with lots of steps. They had a pulley system with a small crate attached that went to the house. A pulley at the house and a pulley at the parking area, with a second rope on the crate. You would load the crate and gravity would let it travel to the porch. We had to kind of hold the rope to keep it slow. Someone would empty, then pull it back up, and load again. After the first load, we just decided to carry our stuff down. It was pretty worn and not all that smooth. We didn’t want to chance having our stuff fall into the shrubs and rocks with lots of snow. It was mounted to a 3” steel post at the top, and bolted to the house wall at the bottom. It must have been a pain in the ass to install and tension everything.

JonJackjon t1_j43dqcr wrote on January 12, 2023 at 10:04 PM

I built a hoist "mono trolley in my garage. I used 2 x 6 on edge with a strip of steel on the top. I used a solid wheel from a HD store caster. It works great for me, perhaps a variation might be useful for your project.

Also note in our state we have a company that sells steel commercially. They have a large out building with "scraps" (some are really big scraps). Perhaps there is one in your area.

Graflex01867 t1_j43omjo wrote on January 12, 2023 at 11:12 PM

Any type of 12-volt winch should work just fine - 60 feet isn’t that far, and you’re well within the weight limit of the cheapest winch. (Even a half ton winch could safely lift 330 pounds.)

For your trolley, I’d look at making “rails” from L-channel steel. Put the vertical piece in the outside. The cart can just be a square of steel with some roller skate wheels on it. They tend to have good bearings and are fairly durable.

The advantage I see using the L-channel is that you can go over whatever your existing landscaping is - you could have flowers, grass, etc. in the middle, and the cart should mostly just push them out of the way.

Mongol_Morg t1_j43pwgq wrote on January 12, 2023 at 11:21 PM

Google ‘inclinator’ and check out the pics.

Spent time at a camp a few years ago and this was the access and from the lake.

Guygan t1_j43qq9k wrote on January 12, 2023 at 11:26 PM

Your submission has been removed for one or more of the following reason(s):

You are asking how to "get started" on a project.
You are asking for a review of your overall plan for a project.
You are asking what is the best method or approach to a project.
You are asking whether or not you should do a project.
You are asking for advice on what project you should make ("what can I make within my budget?")
If you have a project in mind, please do some basic research on the matter, come up with your plan, then you can ask about a specific aspect of the project.

We want you to get the help you're looking for. If you have any of these questions, some places to get help are:

The Getting Started thread at the top of the subreddit.

Ask your question in our Discord server in the appropriate channel.
You may also try other subreddits - /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your question.

Please read our Full Sub Rules before resubmitting.

If you believe this was a mistake, please message the moderators.

It is not question about a specific aspect of a project you are working on.
You are asking for aesthetic advice (e.g. what colour drapes would look nice with your couch).
You are asking if anyone else has ever built something or used a method.
You are asking if a project is "easy".
If you have a project in mind, please do some basic research on the matter, come up with your plan, then you can ask a question about a specific aspect of that project.
If you have any of the questions above - please try using our Getting Started thread at the top of the subreddit.
Ask your question in our Discord server in the appropriate channel.
You may also try other subreddits - /r/homeimprovement, /r/woodworking, /r/whatisthisthing, /r/electronics or /r/findareddit to help you find a subreddit applicable to your question.