Viewing a single comment thread. View all comments

--Ty-- t1_jaarp1i wrote

Reply to comment by ozymandais13 in General Feedback/Getting Started Questions and Answers [Weekly Thread] by AutoModerator

Typically, paints have an application temperature between 15 C and 30 C as the ideal range, sometimes going as low as 10 C on the low end.

There are specialty products that can go as low as 5C or 2C, but you will need to check your product specifically (google it along with the word " TDS ") to see what its application temperature is.

1

ozymandais13 t1_jaeqyhx wrote

Thank you everyone's comments helped , as a followup it went really well ! I had one area on ym second coat I didnt lay perfectly even , it's really only visible if your lookjng from an angle can I sand and reapply poly to an individual spot or would that ruin the whole job

1

--Ty-- t1_jaer9xu wrote

You can't spot-treat with a brush or a roller.

You can technically spot-treat with a spray can, but it's still likely to be noticeable in some lighting / from some angles.

1