Submitted by flyingfinger000 t3_1172o1i in DIY
Looking to Add a Shelf to the mid-section. I have some small boards I can cut but no idea on how to attach it to the middle. Is there some sort of clamp I can use on 4 sides and then easily adjust the height as needed? Or other ideas? I was imagining those little connectors people use in those stackable storage wire cubes but for wood instead. Thanks.
​
ThreeBlurryDecades t1_j9a1nbg wrote
I would probably make a one piece shelf with notches in the corners, then use four brackets made of pieces of angle iron the same width as the legs. A single 1/4 inch bolt drilled through each leg and each corner of the shelf would likely be plenty strong. If you need adjustment, drill multiple holes through the legs. (Though shelves have a way of being adjusted once then left forever at the original height)