Comments

You must log in or register to comment.

Flolania t1_j7tbhpy wrote

Use the vacuum cleaner with the handheld brush attachment from both sides?

1

Mysterious-Ad7019 t1_j7tk69v wrote

Pipe cleaners or anything else like a toothbrush for kids + vacuum cleaner hose next to that to suck up loose dust.

1

Fire__Marshall__Bill t1_j7um2xr wrote

Is that not a thumbscrew on the left for removing the grille? Or yes it is, but the wood frame blocks removal?

If it can't come out, and vacuuming doesn't work, you could blast it with compressed air. It for sure will make a mess, and you'll have to clean your filter after, but it should work.

Unless that is greasy dust that sticks onto the surface then I think you're looking at using a damp cloth (or toothbrush like Mysterious-Ad7019 mentioned) and going 1 by 1 to clean them out.

1

Stinkieface t1_j7uo3wa wrote

I would just pull it out and get a new one. Those are light diffusers they sell them at pretty much any hardware store cheap and easy to cut.

Or just pull it out and spray with a hose

1

Pravus_Belua t1_j7usb94 wrote

Your submission has been removed for one or more of the following reason(s):

  • Your post was regarding cooking, cleaning, general maintenance items.
  • Your post was regarding sewing, general automotive repairs, cosmetics.
  • Your post was regarding software design, CNC, 3D or laser printing.
  • Your post was otherwise not considered a good topic fit for this subreddit.
  • Please consider submitting these projects to /r/crafts, /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your project.

Please read our Full Sub Rules before resubmitting.

If you believe this was a mistake, please message the moderators.

###Do not respond to this comment - you will not receive a response.

1