jjdreggie80 t1_jaectif wrote on February 28, 2023 at 8:48 PM

Sometime, after a power loss, the ice maker needs to be reset. There’s usually a sequence of buttons, or a single button, you have to press to reset the ice maker. You can Google your brand fridge and try that

COW_MEOW OP t1_jaefise wrote on February 28, 2023 at 9:05 PM

I took the cover off, flipped it around and couldn't find anything, but I didn't look at a manual- Ill give it a shot, thanks.

redditguysays t1_jaejl2u wrote on February 28, 2023 at 9:31 PM

Yeah the steps should be online somewhere. I remember having to do this as part of my troubleshooting. I think it involved manually moving the lever that gets pushed in when the ice tray is fully inserted. I think I had to press it in, then release it, 3x or something like that. Those steps would manually kick off the steps of pushing out the formed ice and then opening the valve to fill the ice mold w water.

If you watch what happens you can see if 1) the ice is being ejected from the mold properly, and 2) if the mold is being refilled w water.

In my case, the valve was working properly, but the fill tube (the portion of the tubing that's located on the inside of the freezer section) was frozen.