I bought it like 2 years ago. And it broke in less than a week. It was too weak. I want to rebuild it, but some parts broke and I can't put the screws in it, I think the thing inside that hold the screws are out of place. Sorry for the bad explanation, but I can't post a picture of it. I would love some help

Comments

You must log in or register to comment.

RufusCranium t1_j9p6k4l wrote on February 23, 2023 at 4:16 PM

Fill the screw hole completely with wooden toothpicks soaked in wood glue. Wait a day or two for it to dry. Drill to a hole a bit smaller than the diameter of the screw. Don't overtighten when screwing into the new hole. If you never intend on taking it apart, add some strong Locktite onto the threads of the screw.

annabethhh OP t1_j9p6ok4 wrote on February 23, 2023 at 4:16 PM

I'll it give a try, thank you

annabethhh OP t1_j9p6gij wrote on February 23, 2023 at 4:15 PM

cat tower

J3RAK33N t1_j9pa3bi wrote on February 23, 2023 at 4:38 PM

Based on the images, you might get away with using 4 or so screws around the original hole going into the plastic end of the post from the carpeted plank bit. This all depends on if there is much for the threads to bite into behind the plastic.

annabethhh OP t1_j9pjclw wrote on February 23, 2023 at 5:35 PM

Thank you. I lost a screw inside the hole. I have to buy some more. I'm done for today lol

[deleted] t1_j9p5z4i wrote on February 23, 2023 at 4:12 PM

[deleted]

annabethhh OP t1_j9p6kdo wrote on February 23, 2023 at 4:16 PM

The red parts are the ones that are broken.