Viewing a single comment thread. View all comments

Traditional-Ad-5321 OP t1_j8xjfxe wrote

Thanks everyone for your advice. I bought the removal tool but it wouldn’t go deeper than about 1/4” - so applying turning pressure would just make it slip out. I ended up cutting a few notches into it with an angle grinder and then using a hammer and chisel to turn it, finally got it:

https://i.imgur.com/joV4dBp.jpg

3

Traditional-Ad-5321 OP t1_j8yi5nb wrote

Just wanted to thank everyone again for their help. With the drain removed I made quick work of the tub - smashed it to bits and didn’t damage anything I wasn’t supposed to.

1