Viewing a single comment thread. View all comments

some_edgy_shit- t1_j2jvmdw wrote

Actually they can get through just fine with regular wheels even in high water. before the rover goes through the sewer main they pull a rotating pressure washer that gets rid of most the grime that would prevent the wheels from getting traction. They get submerged frequently and can handle no problem. Only thing bad about it is there’s nothing to clean the camera after it gets wet so it can ruin the footage. Source I review footage as part of my work

6

Generallyapathetic92 t1_j2jwsa2 wrote

Not in the UK. No idea what size sewers you’re talking about but never come across anything that does that and sewers being surcharged is often a reason for them being unable to complete the survey.

2

some_edgy_shit- t1_j2jymsm wrote

I work for a rural water district most lines are 6-8 in. When the camera gets submerged we usually tell the contractor to get new footage. On my end it actually happens fairly often but I have to flag it each time as sagging pipe.

What issues do you usually run into if you don’t mind me asking? I’m curious if it’s much different than here

2

Generallyapathetic92 t1_j2k18cy wrote

So if they need to get new footage I assume that’s because they can’t properly survey it?

Generally debris (from sewer collapse or silt), standing water and roots are the main reasons we can’t complete them. Jetting the sewers may help in some cases but roots can still be problematic even after that.

Water level is rarely due to sagging pipe in my experience as the surveyors can get through some water. It’s normally due to the sewer network being fully surcharged either due to storm events or operational issues.

4

some_edgy_shit- t1_j2k20zz wrote

Yeah they need to get new footage. What your sayings pretty consistent to what I see. I didn’t bring up roots blocking before because the type of tire wouldn’t help with a root ball. We usually don’t get too many blockages from debris though. The contractor has an issue with trying to save time and they pull the pressure watcher like 20 feet or less ahead of the rover. I’m going to try to attach an image of an odd one

2

some_edgy_shit- t1_j2k3202 wrote

Yeah they need to get new footage. What your sayings pretty consistent to what I see. I didn’t bring up roots blocking before because the type of tire wouldn’t help with a root ball. We usually don’t get too many blockages from debris though. The contractor has an issue with trying to save time and they pull the pressure watcher like 20 feet or less ahead of the rover. I’m going to try to attach an image of an odd one. - I can’t find the photo :(

2

Generallyapathetic92 t1_j2mu4ub wrote

Yeah, depends on the amount of roots in my experience but generally agree it wouldn’t help. Honestly not sure if it will help at all but only reason I can see why they’d do it.

Could be you don’t see many if they are jetting the sewer as standard. Generally not the case in the UK and we’d only jet if there is a need to do so. Assume it saves money overall even if we need to pay again.

2

some_edgy_shit- t1_j2n7ft6 wrote

If it’s not standard for you it’s probably not standard most places in the us either. I’m split between a county and a military base. The military contract requires we us to jet 10% of the total length of line every year. Thanks for letting me know that through I made an assumption that was wrong.

1